Interested...?    contact: info@servicebase.info

GMI Shipsurveyor - Portable Marine Gas Monitor

posted 29 Jun 2010 02:09 by Alfredo Poluzzi   [ updated 30 Jan 2012 00:48 ]

 MED
 
Shipsurveyor, yet simple to use, is the complete shipping solution ATEX and MED approved

The GMI (Gas Measurement Instruments Ltd.) Shipsurveyor is versatile and it was designed after extensive consultation with shipowners, ship managers and shipping personnel. 
The result is a range of 7 instrument configurations suitable for all marine applications including confined space monitoring, cargo monitoring and tank inerting.
Up to 5 gases can be simultaneously measured and displayed while the hydrocarbon range utilises the latest infrared technology 

Shipsurveyor comes complete with an impressive and practical suite of application software and the datalogging comes as standard allowing the gas readings to be uploaded to a PC. Simple on-board calibration and the ability to print calibration certificates are provided.

FEATURES
Simple calibration with certificate printing
Large display – all gas readings simultaneously displayed
Dual mode – Combustibe Gas Indicator (CGI) and Confined Space Monitor (CSM )
Configurable audible and visual Alarms (CSM)
Internal pump with superior flow rate to minimise tank sampling times
Enhanced datalogging with ‘Location’
Innovative ‘quick-connect’ range of accessories
Fault detection and reporting
Language option

MEASURING RANGES

0-100% LEL Flammables (*)
0-100% Volume Gas Flammables (*)
0-25% Oxygen (O2)
0-100 ppm Hydrogen Sulphide (H2S)
0-20% Carbon Dioxide (CO2) (*)
0-1000 ppm Carbon Monoxide (CO)
---> (*) Infra-Red Detection


Pressure transmitters 27 series HART® enabled

posted 12 Sep 2009 20:54 by Alfredo Poluzzi   [ updated 23 Aug 2010 05:57 ]


Valcom™ Pressure-vacuum electronic transmitters 4÷20mA/2 wires (max21.5mA 12÷40Vdc) + HART® rev6
- Total accuracy: <±0.1%FS / 0.25%FS *
- Process temperature range -40÷+80°C: (T min -25°C)
- Protection rating: IP67 (IP68 for submersible version)
- Vibration resistance: according to IEC60068-2-6
- ATEX certification
- Ranges: from 0,025 to 400 bar (optional extra range)
     (*) Accuracy and drifts may vary depending on sensor type
     MARINE TYPE APPROVED

Pressure transmitters DP T7k series HART® enabled

posted 12 Sep 2009 20:30 by Alfredo Poluzzi   [ updated 25 Nov 2009 08:44 ]

Valcom™ Electronic SMART Delta P transmitter, Capacitive cell
- 100% st.st./AISI 316L
- Signal analog 4-20mA with digital HART® protocol superimposed, (remote configuration through HART® communicator)
- OPTION: LCD display and push buttons for local configuration
- Ranges from 0-0.06÷0.6 kpa / 0-0.5÷4 mbar to 40 Mpa / 400 bar
MARINE TYPE APPROVED

1-3 of 3